Oriental and Fine Rug Cleaning
We recommend oriental rugs, loose woven rugs, stained or urine damaged rugs, be cleaned in our state of the art rug cleaning factory. Unlike wall to wall carpet these rugs should not be cleaned onsite. Australian Certified Property Solutions cares for the finest to the most basic rugs from around the world.
We will pick your rug up and bring it to our special cleaning factory, where it will receive our very thorough Ten Step Cleaning System to get maximum soil and spot removal out of your precious rug/s
Having your rug cleaned in our plant allows us to give it several treatments for a more thorough cleaning, controlled drying, and the use of various tools that are not available on location.

Sanitization Treatment
- Helps remove unwanted odours from smoke and pet sources etc.
- Eliminates odours approximately 80% of the time
- Unique ‘pairing agent’ deodorizer further helps to remove odours
Fine Rug Protector
- Extends the life of the fibre.
- Makes future cleaning easier.
- Helps prevent staining.
Recommended Cleaning Process
1. Measure & inspect rug
2. Test for colourfastness.
3. Thoroughly vacuum to remove dry soil
4. Treat stubborn spots
5. Rotary shampoo or hand wash
6. Extract / Clear-water rinse
7. Speed dry with drying racks and powerful air movers
8. Post cleaning inspection.
9. Hand finish fringes
10. Wrap to protect rug for storage or delivery

Fine Rug Protector
- Extends the life of the fibre.
- Makes future cleaning easier.
- Helps prevent staining.
Recommended Cleaning Process
1. Measure & inspect rug
2. Test for colourfastness.
3. Thoroughly vacuum to remove dry soil
4. Treat stubborn spots
5. Rotary shampoo or hand wash
6. Extract / Clear-water rinse
7. Speed dry with drying racks and powerful air movers
8. Post cleaning inspection.
9. Hand finish fringes
10. Wrap to protect rug for storage or delivery

Recommended Cleaning Process
1. Measure & inspect rug
2. Test for colourfastness.
3. Thoroughly vacuum to remove dry soil
4. Treat stubborn spots
5. Rotary shampoo or hand wash
6. Extract / Clear-water rinse
7. Speed dry with drying racks and powerful air movers
8. Post cleaning inspection.
9. Hand finish fringes
10. Wrap to protect rug for storage or delivery

In home Basic Steam Cleaning Process
1. Measure & inspect rug
2. Test for colourfastness.
3. Thoroughly vacuum to remove dry soil
4. Treat stubborn spots
5. Pre-Condition treatment
6. Extract / Clear-water rinse
7. Post cleaning inspection.
How to Care for your Oriental Rug
Rotation – To insure even wear, your rug should be rotated once a year. Depending on the traffic, the rotation may vary from six months to two years.
Vacuuming – Oriental rugs, like most carpeting, should be vacuumed on a regular basis to remove dirt and restore life to the fibres. Be sure not to vacuum the fringe with your beater bar! Use the end of a vacuum hose from a canister vacuum.
Padding – A quality pad used under your rug helps protect it from dirt, wear and slippage.
See below for quality rug pad Spot and Spill Procedures
Make sure that you safely and immediately clean up spots and spills before they set.
First, soak up the excess liquid by blotting with a clean absorbent material. Do not brush or rub the stain.
Then spot-clean with a mild detergent-white vinegar-water solution. Do-not over wet. Rinse area thoroughly with water and a small amount of vinegar. Avoid wetting the rug’s backing. Blot dry until most of the moisture has been absorbed. Allow to air dry.
A fan or cool hair dryer can be used to hasten the drying process.
For stains that do not come out using these methods, ask our cleaning specialists.
_